• Applications:
  • Ideal for building applications where cellular service is readily available at an external location outside the building, yet coverage is poor when the mobile user enters the facility. Typical structures that may benefit from the CDS system are buildings with metal walls or heavy rebar, underground or basement locations. CDS offers product support for all major bands utilized in North America. To find the frequency band used by your service provider, please visit www.wirelessadvisor.com.
• Coverage Areas:
  • Coverage is highly dependent on the signal strength at the single external antenna location of each provider
  • Open space installation – 60,000 sq feet per panel coverage established.
  • Office space installation – 30,000 sq feet
  • Open space coverage is easier to obtain than closed and walled space
  • Materials such as metal and reinforced concrete reduce effective range
  • The longer the coaxial cable-run to both the external and internal antennas, the less coverage range
  • With 100′ of LMR from the panel to theinternal antennas, approximately 100′ of functional range will occur dependent on the signal strength at the external antenna location
  • Antenna placement in the facility is key to successful deployment
• Features:
  • "Quick and Easy" install kit with explicit instructions and no software configuration.
  • Complete kit includes 1 external low-profile dual-band omni-directional 3dBi gain anteanna, 4 internal omni directional broadband ceiling-mount dome antennas.
  • Utilizes low loss coaxial cable to distribute cellular provider signals throughout a building.
  • Requires strong cellular service provider signal at the external antenna location.
  • CDMA, TDMA and GSM compatible, including high-speed data and 3G internet services.
  • 19" rack mount panel kit is 3 RU size form factor.
• Supported Technologies:
  • 65 dB gain for both 806-866 MHz and 1840-1990 MHz bands simultaneously, as well as for both 824-896 MHz and 1840-1990 MHz bands, respective to the Dual Band product chosen
  • Utilizes standard 50 Ohm N connectors for all connectivity
  • Automatic gain adjustment
  • Maximum 3W power output
  • +30 dBm RF Uplink, +30 dBm RF Downlink maximum
  • FCC part 22 compliant as a low-power cellular accessory
  • 18 lbs panel weight, 4.75" x 17.50" x 8.195"
  • 13.75" External Antenna Length
  • Utilizes in-line coaxial gas tube for lightning surge suppression
  • 120 VAC power supply input

• Applications:
  • Ideal for building applications where cellular service is readily available at an external location outside the building, yet coverage is poor when the mobile user enters the facility. Typical structures that may benefit from the CDS system are buildings with metal walls or heavy rebar, underground or basement locations. CDS offers product support for all major bands utilized in North America. To find the frequency band used by your service provider, please visit www.wirelessadvisor.com.
• Coverage Areas:
  • Coverage is highly dependent on the signal strength at the single external antenna location of each provider
  • Open space installation – 60,000 sq feet per panel coverage established.
  • Office space installation – 30,000 sq feet
  • Open space coverage is easier to obtain than closed and walled space
  • Materials such as metal and reinforced concrete reduce effective range
  • The longer the coaxial cable-run to both the external and internal antennas, the less coverage range
  • With 100′ of LMR from the panel to theinternal antennas, approximately 100′ of functional range will occur dependent on the signal strength at the external antenna location
  • Antenna placement in the facility is key to successful deployment
• Features:
  • "Quick and Easy" install kit with explicit instructions and no software configuration.
  • Complete kit includes 1 external low-profile dual-band omni-directional 3dBi gain anteanna, 4 internal omni directional broadband ceiling-mount dome antennas.
  • Utilizes low loss coaxial cable to distribute cellular provider signals throughout a building.
  • Requires cellular service provider signal at the external antenna location.
  • CDMA, TDMA and GSM compatible, including high-speed data and 3G internet services.
  • 19" rack mount panel kit is 2 RU size form factor.
• Supported Technologies:
  • 65 dB gain for both 1840-1990 band
  • Utilizes standard 50 Ohm N connectors for all connectivity
  • Automatic gain adjustment
  • Maximum 3W power output
  • +30 dBm RF Uplink, +30 dBm RF Downlink maximum
  • FCC part 22 compliant as a low-power cellular accessory
  • 13.75" External Antenna Length
  • Utilizes in-line coaxial gas tube for lightning surge suppression
  • 120 VAC power supply input

Cellular Distribution System – 800 – 900 MHz

OCC’s patent pending Cellular Distribution System (CDS) is designed to improve localized cellular coverage within a building that experiences low signal strength where service provider coverage is acceptable at a nearby outdoor location. The CDS solution applies structured cabling concepts to support wireless communications within a building, using either existing or newly installed coaxial cable to distribute wireless signals. This is accomplished using a unique Distributed Antenna Technology. Four antenna faceplates are cabled to the rack mount CDS panel, creating signal pathways to an external omni-directional antenna for signals that otherwise would experience heavy propagation losses. Materials that cause such losses include external metal siding, concrete and rebar, which seriously inhibit cellular propagation inside your building. These materials are bypassed using the easy-to-install CDS Installation Kit, making the cell phone coverage inside your building as good as the coverage you get outside. Each kit includes all the components required, with easy-to-follow explicit instructions for fast installation to improve your indoor cellular service.